Key Pro M8 update guide

Key Pro M8 is the most powerful and professional Auto key Programmer for multi brand vehicle makes. It is an upgradable key adding and new key making machine. Following is the step-by-step guide of update the Key Pro M8 software.

Step 1 First of all, you should install the driver on the PC. You can refer to the blog here for detail instructions before update tokens and software.
Step 2 Connect the Key Pro M8 main unit with PC via USB port. Turn the device ignition on.
Step 3 Double click “M8 Update Tool. exe”, then you will notify the Serial Number of your key pro m8 after the system identifying it automatically.
Step 4 Enter the password after receiving the SN to login.
Step 5 Click “Open update file”, then select “Download” to load “S1093B1102. m8” file. The procedure lasts for about 10 minutes. Please wait patiently.
Step 6 Several software are included in the “S1093B1102. m8” file for you to update.
NOTE: When work on Toyota vehicles, no need to calculate the pin code.

Something to keep in mind any time you're making car modifications. Don’t forget that certain alterations to the body of your vehicle will necessitate a modification of the driveshaft as well. The ideal angel for most driveshafts is only one degree. It’s pretty easy to miss this mark. If it is off, it can cause damage to your vehicle and turn your upgrade into a huge liability. The biggest culprits that require attention are installing lift kits, changing the exhaust system, and using a Car Diagnostic Scanners Tools for racing.

Performance air intakes are usually low to the ground, and in places with a lot of rain or water on the roads that can scoop up water along with air into the engine, resulting in "hydrolock". More commonly known as engine failure. If you live in areas with heavy rain, add water bypass filters to your intake to channel the water away from the sensitive parts of the engine.